来源：
https://blog.csdn.net/linuxarmsummary/article/details/22326719

提前说明：

下面的一些配置选项，提前说一下：

--enable-malloc0returnsnull 
加了此项就不用去改configure， 相当于
#vi configure to find "cannot run test program while cross compiling"
#modify { (exit 1); exit 1; }; } to }

编译环境:

ubuntu 8.04 LTS / cross compile=arm-linux-xxx-4.1.2

TinyX 移植步骤：

mkdir ~/xroot/soft -p
cd ~/xroot/soft

wget -c http://xmlsoft.org/sources/libxml2-2.6.32.tar.gz                                #00
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/proto/inputproto-1.4.2.1.tar.bz2                #01
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/proto/kbproto-1.0.3.tar.bz2                #02
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/proto/bigreqsproto-1.0.2.tar.bz2                #03
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/proto/xproto-7.0.10.tar.bz2                #04
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/proto/xextproto-7.0.2.tar.bz2                #05
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/proto/xcmiscproto-1.1.2.tar.bz2                #06
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/proto/xf86bigfontproto-1.1.2.tar.bz2            #07
wget -c http://xorg.freedesktop.org/releases/X11R7.2/src/everything/xtrans-X11R7.2-1.0.3.tar.bz2            #08
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/lib/libXau-1.0.3.tar.bz2                    #09
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/lib/libXdmcp-1.0.2.tar.bz2                    #10
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/everything/util-macros-1.1.5.tar.bz2            #11
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/everything/libX11-1.1.3.tar.bz2                #12
wget -c ftp://ftp.tw.freebsd.org/pub/ FreeBSD/distfiles/xorg/lib/libX11-1.1.2.tar.bz2                #another 12
wget -c http://www.zlib.net/zlib-1.2.3.tar.bz2                                        #13
wget -c http://download.berlios.de/tslib/tslib-1.0.tar.bz2                                #14
wget -c http://download.savannah.gnu.org/releases/freetype/freetype-2.3.5.tar.bz2                    #15
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/proto/compositeproto-0.4.tar.bz2                #16
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/proto/damageproto-1.1.0.tar.bz2                #17
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/proto/fixesproto-4.0.tar.bz2                #18
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/proto/recordproto-1.13.2.tar.bz2                #19
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/proto/resourceproto-1.0.2.tar.bz2                #20
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/proto/scrnsaverproto-1.1.0.tar.bz2            #21
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/proto/xineramaproto-1.1.2.tar.bz2                #22
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/proto/videoproto-2.2.2.tar.bz2                #23
git clone git://git.freedesktop.org/git/xorg/proto/calibrateproto.git                            #24
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/proto/fontsproto-2.0.2.tar.bz2                #25
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/proto/fontcacheproto-0.1.2.tar.bz2            #26
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/proto/randrproto-1.2.1.tar.bz2                #27
wget -c http://xorg.freedesktop.org/releases/X11R7.2/src/proto/renderproto-X11R7.0-0.9.2.tar.bz2            #28
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/proto/renderproto-0.9.3.tar.bz2                #28 2rd
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/proto/xf86miscproto-0.9.2.tar.bz2                #29
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/proto/xf86vidmodeproto-2.2.2.tar.bz2            #30
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/proto/xf86dgaproto-2.0.3.tar.bz2                #31
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/lib/libxkbfile-1.0.4.tar.bz2                #32
git clone git://git.freedesktop.org/git/xorg/lib/libXCalibrate.git                            #33
wget -c http://xorg.freedesktop.org/releases/individual/lib/libXrender-0.9.2.tar.bz2                #34
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/lib/libXrender-0.9.4.tar.bz2                #34 2nd
wget -c http://xorg.freedesktop.org/releases/individual/lib/libXrandr-1.2.1.tar.bz2                    #35
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/lib/libXrandr-1.2.2.tar.bz2                #35 2nd
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/lib/libfontenc-1.0.4.tar.bz2                #36
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/lib/libXfont-1.3.1.tar.bz2                    #37
wget -c http://xorg.freedesktop.org/releases/individual/xserver/xorg-server-1.3.0.0.tar.bz2            #38
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/xserver/xorg-server-1.4.tar.bz2                #38 2nd
wget -c http://x.cybermirror.org/pub/individual/lib/libXext-1.0.3.tar.bz2                        #39
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/everything/libXext-1.0.2.tar.bz2                #39 2nd
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/everything/libXi-1.1.3.tar.bz2                #40

wget -c http://x.cybermirror.org/pub/individual/lib/libXi-1.1.2.tar.bz2                        #41
wget -c http://downloads.sourceforge.net/expat/expat-2.0.0.tar.gz                            #41 2nd
wget -c ftp://ftp.vcu.edu/pub/gnu+linux/puppylinux/pupget_packages-1/expat-2.0.0.tar.gz
wget -c ftp://ftp.linux.ee/pub/gentoo/distfiles/distfiles/fontconfig-2.4.2.tar.gz                    #42
wget -c http://www.ijg.org/files/jpegsrc.v6b.tar.gz                                    #43
wget -c ftp://ftp.uu.net/graphics/jpeg/jpegsrc.v6b.tar.gz
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/proto/fixesproto-4.0.tar.bz2                #51=18
wget -c ftp://ftp.simplesystems.org/pub/libpng/png/src/libpng-1.2.33.tar.bz2                     #44
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/lib/libICE-1.0.4.tar.bz2                    #45
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/lib/libSM-1.0.3.tar.bz2                    #46
wget -c http://www.cairographics.org/releases/cairo-1.4.14.tar.gz                            #47
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/lib/libXft-2.1.12.tar.bz2                    #48
wget -c http://ftp.gnome.org/pub/gnome/sources/glib/2.14/glib-2.14.6.tar.bz2                        #49
wget -c http://ftp.gnome.org/pub/gnome/sources/pango/1.18/pango-1.18.3.tar.bz2                    #50
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/lib/libXinerama-1.0.2.tar.bz2                #53
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/proto/xineramaproto-1.1.2.tar.bz2                #52=22
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/lib/libXfixes-4.0.3.tar.bz2                #54
wget -c http://mirrors.rootmode.com/ftp.gnupg.org/libgpg-error/libgpg-error-1.0.tar.gz                #55
wget -c ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.2.3.tar.gz                            #56
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/lib/libXcomposite-0.4.0.tar.bz2                #57
wget -c http://ftp.gnome.org/pub/gnome/sources/atk/1.20/atk-1.20.0.tar.bz2                        #58
wget -c http://xorg.freedesktop.org/releases/X11R7.2/src/lib/libXcursor-X11R7.2-1.1.8.tar.bz2            #59
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/lib/libXcursor-1.1.9.tar.bz2                #59 2nd
wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/lib/libXdamage-1.0.4.tar.bz2                #60
wget -c http://xorg.freedesktop.org/releases/individual/lib/libXdamage-1.1.1.tar.bz2                #61
wget -c http://ftp.gnome.org/pub/gnome/sources/gtk+/2.12/gtk+-2.12.7.tar.bz2                        #61 2nd
wget -c http://ftp.gnome.org/pub/gnome/sources/gtk+/2.14/gtk+-2.14.4.tar.bz2                        #61
wget -c ftp://ftp.gnome.org/mirror/gnome.org/sources/libglade/2.6/libglade-2.6.3.tar.gz                #62


wget -c http://xorg.freedesktop.org/releases/X11R7.3/src/everything/xtrans-1.0.4.tar.bz2

补丁下载：

• 到 http://www.pokylinux.org/ 网站下载 pinky-3.1.1 ，解压之后，在pinky-3.1.1/meta/packages patch可用。

  SofTool.CN Notes:
  经测试上面的网站已经不能使用，可在 https://gitee.com/bydvp/poky/releases?page=15 下载 pinky-3.1.1

• svn co http://svn.o-hand.com/repos/poky/trunk poky 其中也有部分的patch可用

mkdir ~/xroot/soft/patches
cd ~/xroot/soft/patches
svn co http://svn.o-hand.com/repos/poky/trunk poky

wget -c http://pokylinux.org/releases/poky-pinky-3.1.1.tgz
tar zxf poky-pinky-3.1.1.tgz
cd pinky-3.1.1/meta/packages/
ls

准备编译：

step 1： Cross环境设定

export XROOT=$HOME/xroot
export PREFIX=$XROOT
export LD_LIBRARY_PATH=$PREFIX/lib
export PKG_CONFIG_PATH=$LD_LIBRARY_PATH/pkgconfig
export HOST=arm-linux
export BUILD=i686-linux

export CC=arm-linux-gcc
export CXX=arm-linux-g++
export AR=arm-linux-ar
export RANLIB=arm-linux-ranlib
export NM=arm-linux-nm
export AS=arm-linux-as
export LD=arm-linux-ld
export STRIP=arm-linux-strip
export READELF=arm-linux-readelf
export STRINGS=arm-linux-strings
export SIZE=arm-linux-size
export ADDR2LINE=arm-linux-addr2line

编译相关库

mkdir ~/xroot/build_tmp
cd ~/xroot/build_tmp

外部依赖于libxml2, 需要额外编译。

tar zxf ../soft/libxml2-2.6.32.tar.gz
cd libxml2-2.6.32
./configure --host=$HOST --build=$BUILD --prefix=$PREFIX
make all; make install

step 2： 移植X11

01、 inputproto-1.4.2.1

tar jxf ../soft/inputproto-1.4.2.1.tar.bz2
cd inputproto-1.4.2.1
./configure –prefix=$PREFIX –host=$HOST –build=$BUILD
make install

02、 kbproto-1.0.3

tar jxf ../soft/kbproto-1.0.3.tar.bz2
cd kbproto-1.0.3
./configure –prefix=$PREFIX –host=$HOST –build=$BUILD
make install
或者:
make; make install

03、 bigreqsproto-1.0.2

tar jxf ../soft/bigreqsproto-1.0.2.tar.bz2
cd bigreqsproto-1.0.2
./configure –prefix=$PREFIX –host=$HOST –build=$BUILD
make install # or make; make install

04、 xproto-7.0.10

tar jxf ../soft/xproto-7.0.10.tar.bz2
cd xproto-7.0.10
./configure –prefix=$PREFIX –host=$HOST –build=$BUILD
make install # or make; make install

05、 xextproto-7.0.2

tar jxf ../soft/xextproto-7.0.2.tar.bz2
cd xextproto-7.0.2
./configure –prefix=$PREFIX –host=$HOST –build=$BUILD
make install # or make; make install

06、 xcmiscproto-1.1.2

tar jxf ../soft/xcmiscproto-1.1.2.tar.bz2
cd xcmiscproto-1.1.2
./configure –prefix=$PREFIX –host=$HOST –build=$BUILD
make install # or make; make install

07、 xf86bigfontproto-1.1.2

tar jxf ../soft/xf86bigfontproto-1.1.2.tar.bz2
cd xf86bigfontproto-1.1.2
./configure –prefix=$PREFIX –host=$HOST –build=$BUILD
make install # or make; make install

08、 xtrans-X11R7.2-1.0.3

tar jxf ../soft/xtrans-X11R7.2-1.0.3.tar.bz2
cd xtrans-X11R7.2-1.0.3
patch -Np1 -i $XROOT/soft/patches/pinky-3.1.1/meta/packages/xorg-lib/xtrans/fix-missing-includepath.patch
./configure –prefix=$PREFIX –host=$HOST –build=$BUILD
make install # or make; make install

09、 libXau-1.0.3

tar jxf ../soft/libXau-1.0.3.tar.bz2
cd libXau-1.0.3
./configure –prefix=$PREFIX –host=$HOST –build=$BUILD –enable-static=yes –enable-shared=yes –enable-malloc0returnsnull
make all; make install

10、 libXdmcp-1.0.2

tar jxf ../soft/libXdmcp-1.0.2.tar.bz2
cd libXdmcp-1.0.2
./configure –prefix=$PREFIX –host=$HOST –build=$BUILD –enable-static=yes –enable-shared=yes –enable-malloc0returnsnull
make all; make install

11、 util-macros-1.1.5

tar jxf ../soft/util-macros-1.1.5.tar.bz2
cd util-macros-1.1.5
patch -Np1 -i $XROOT/soft/patches/pinky-3.1.1/meta/packages/xorg-util/files/unbreak_cross_compile.patch
./configure –build=$BUILD –host=$HOST –prefix=$PREFIX
make install

12、 libX11-1.1.2

tar jxf ../soft/libX11-1.1.2.tar.bz2
cd libX11-1.1.2

patch -Np1 -i $XROOT/soft/patches/pinky-3.1.1/meta/packages/xorg-lib/libx11/include_fix.patch
patch -Np1 -i $XROOT/soft/patches/pinky-3.1.1/meta/packages/xorg-lib/libx11/x11_disable_makekeys.patch
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD --enable-static=yes --enable-shared=yes --enable-malloc0returnsnull --without-xcb --with-keysymdef=$PREFIX/include/X11/keysymdef.h

vi ./src/Makefile
#编辑ks_tables.h的依赖关系：要注释的内容如下。
#    ks_tables.h: $(KEYSYMDEF) $(top_builddir)/src/util/makekeys$(EXEEXT)
#        # $(top_builddir)/src/util/makekeys < $(KEYSYMDEF) > ks_tables_h
#        # mv ks_tables_h $@

#把  src/util/makekeys 文件用gcc编译［ gcc -o makekeys makekeys.c］，执行 makekeys <> ks_tables_h， 把生成的 ks_tables_h 文件放在 src 目录下
cd src/util
make clean
gcc -o makekeys makekeys.c
./makekeys <$PREFIX/include/X11/keysymdef.h> ks_tables_h
mv ks_tables_h ../ks_tables.h

cd ../../
make all
make install

step 3： Xserver (Kdrive)移植

13、 zlib-1.2.3 //对于交叉编译已有此libz.so.1.2.3的，此步无须编译。

tar jxf ../soft/zlib-1.2.3.tar.bz2
cd zlib-1.2.3
patch -Np1 -i $XROOT/soft/patches/pinky-3.1.1/meta/packages/zlib/files/visibility.patch
./configure --prefix=$PREFIX --shared
make all
make install

14、 tslib-1.0

tar jxf ../soft/tslib-1.0.tar.bz2
cd tslib-1.0
patch -Np1 -i $XROOT/soft/patches/pinky-3.1.1/meta/packages/tslib/tslib/fix_version.patch

./autogen.sh

#修改./etc/ts.conf 开放 module_raw input

./configure --prefix=$PREFIX --host=$HOST --build=$BUILD --enable-shared=yes --enable-static=yes --enable-ucb1x00=no --enable-corgi=no --enable-collie=no --enable-h3600=no --enable-mk712=no --enable-arctic2=no --enable-input

#修改 在config.h里加上#undef rpl_malloc， 同时封掉  /* #define malloc rpl_malloc */
make all
make install

15、 freetype-2.3.5

tar jxf freetype-2.3.5.tar.bz2
cd freetype-2.3.5

patch -Np1 -i $XROOT/soft/patches/pinky-3.1.1/meta/packages/freetype/freetype-2.3.5/fix-x86_64-build.patch
patch -Np1 -i $XROOT/soft/patches/pinky-3.1.1/meta/packages/freetype/files/no-hardcode.patch

./configure --prefix=$PREFIX --host=$HOST --build=$BUILD

make all
make install

16、 compositeproto-0.4

tar jxf ../soft/compositeproto-0.4.tar.bz2
cd compositeproto-0.4
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD
make install

17、 damageproto-1.1.0

tar jxf ../soft/damageproto-1.1.0.tar.bz2
cd damageproto-1.1.0
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD
make install 

18、 fixesproto-4.0

tar jxf ../soft/fixesproto-4.0.tar.bz2
cd fixesproto-4.0
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD
make install

19、 recordproto-1.13.2

tar jxf ../soft/recordproto-1.13.2.tar.bz2
cd recordproto-1.13.2
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD
make install

20、 resourceproto-1.0.2

tar jxf ../soft/resourceproto-1.0.2.tar.bz2
cd resourceproto-1.0.2
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD
make install

21、 scrnsaverproto-1.1.0

tar jxf ../soft/scrnsaverproto-1.1.0.tar.bz2
cd scrnsaverproto-1.1.0
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD
make install

22、 xineramaproto-1.1.2

tar jxf ../soft/xineramaproto-1.1.2.tar.bz2
cd xineramaproto-1.1.2
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD
make install

23、 videoproto-2.2.2

tar jxf ../soft/videoproto-2.2.2.tar.bz2
cd videoproto-2.2.2
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD
make install

24、 calibrateproto

tar jxf ../soft/calibrateproto.tar.bz2
cd calibrateproto
./autogen.sh
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD
make install

25、 fontsproto-2.0.2

tar jxf ../soft/fontsproto-2.0.2.tar.bz2
cd fontsproto-2.0.2
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD
make install

26、 fontcacheproto-0.1.2

tar jxf ../soft/fontcacheproto-0.1.2.tar.bz2
cd fontcacheproto-0.1.2
./configure –prefix=$PREFIX –host=$HOST –build=$BUILD
make install

27、 randrproto-1.2.1

tar jxf ../soft/randrproto-1.2.1.tar.bz2
cd randrproto-1.2.1
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD
make install

28、 renderproto-X11R7.0-0.9.2

tar jxf ../soft/renderproto-X11R7.0-0.9.2.tar.bz2
cd renderproto-X11R7.0-0.9.2
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD
make install

29、 xf86miscproto 0.9.2

tar jxf ../soft/xf86miscproto-0.9.2.tar.bz2
cd xf86miscproto-0.9.2

./configure --prefix=$PREFIX --host=$HOST --build=$BUILD

make install

30、 xf86vidmodeproto 2.2.2

tar jxf ../soft/xf86vidmodeproto-2.2.2.tar.bz2
cd xf86vidmodeproto-2.2.2
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD
make install

31、 xf86dgaproto 2.0.3

tar jxf ../soft/xf86dgaproto-2.0.3.tar.bz2
cd xf86dgaproto-2.0.2
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD
make install

32、 libxkbfile-1.0.4

tar jxf ../soft/libxkbfile-1.0.4.tar.bz2
cd libxkbfile-1.0.4
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD --enable-static=yes --enable-shared=yes
make all; make install

39、 libXext-1.0.3

tar jxf ../soft/libXext-1.0.3.tar.bz2
cd libXext-1.0.3
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD --enable-static=yes --enable-shared=yes --enable-malloc0returnsnull
make all; make install

33、 libXCalibrate

tar jxf ../soft/libXCalibrate.tar.bz2
cd libXCalibrate
./autogen
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD --enable-static=yes --enable-shared=yes
make all; make install

34、 libXrender-0.9.2

tar jxf ../soft/libXrender-0.9.2.tar.bz2
cd libXrender-0.9.2
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD --enable-static=yes --enable-shared=yes --enable-malloc0returnsnull
make all; make install

35、 libXrandr-1.2.1

tar jxf ../soft/libXrandr-1.2.1.tar.bz2
cd libXrandr-1.2.1
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD --enable-static=yes --enable-shared=yes --enable-malloc0returnsnull
make all; make install

36、 libfontenc-1.0.4

tar jxf ../soft/libfontenc-1.0.4.tar.bz2
cd libfontenc-1.0.4
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD --enable-shared=yes --enable-static=yes
#vi ./src/Makefile 修改 DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) -I$(PREFIX)/include
make all; make install

37、 libXfont-1.3.1

tar jxf ../soft/libXfont-1.3.1.tar.bz2
cd libXfont-1.3.1

./configure --prefix=$PREFIX --host=$HOST --build=$BUILD --enable-shared=yes --enable-static=yes
make all; make install

38、 xorg-server-1.3.0.0

tar jxf ../soft/xorg-server-1.3.0.0.tar.bz2
cd xorg-server-1.3.0.0

//准备步骤:
//第1步:
修改 configure, 寻找 cannot check for file existence when cross compiling, 把{ (exit 1); exit 1; };} 改成 }
//第2步:
修改 configure, 在25363行，加入tslib路径:

LDFLAGS="-L${XROOT}/lib -lfreetype -lts -lz -lXfont"
TSLIB_LIBS="-L${XROOT}/lib -lts"
TSLIB_CFLAGS="-I${XROOT}/include"
FREETYPE_CFLAGS="-I${XROOT}/include/freetype2 -I${XROOT}/include"
FREETYPE_LIBS="-L${XROOT}/lib -lfreetype"

//第3步: 终端输入

ac_cv_file__usr_share_X11_sgml_defs_ent=no

//第4步: 我用的这里

./configure --prefix=$PREFIX --host=$HOST --build=$BUILD --enable-shared=yes --enable-static=yes --enable-composite --enable-kdrive --disable-dga --disable-dri --disable-xinerama --disable-xf86misc --disable-xf86vidmode --disable-xorg --disable-xorgcfg --disable-xkb --disable-xnest --disable-xvfb --disable-xevie --disable-xprint --disable-xtrap --disable-dmx --enable-tslib --enable-xcalibrate -with-default-font-path=built-ins

或者指定寻找字体的目录

./configure --prefix=$PREFIX --host=$HOST --build=$BUILD --enable-shared=yes --enable-static=yes --enable-composite --enable-kdrive --disable-dga --disable-dri --disable-xinerama --disable-xf86misc --disable-xf86vidmode --disable-xorg --disable-xorgcfg --disable-xkb --disable-xnest --disable-xvfb --disable-xevie --disable-xprint --disable-xtrap --disable-dmx --enable-tslib --enable-xcalibrate--with-fontdir=${PREFIX}/fonts

make all; make install

注意：在此处可到开发版上测试 X11 的可用性， 执行 Xfbdev， 如果有出现错误：

1. E: _XSERVTransSocketUNIXCreateListener: …SocketCreateListener() failed _XSERVTransMakeAllCOTSServerListeners: server already running
   R: rm /tmp/.X11-unix/ -rf
2. E: Extended Input Devices not yet supported. Implement it at line 625 in kinput.c
   Could not init font path element /xxx/lib/X11/fonts/misc/, removing from list!
   … …
   Could not init font path element /xxx/lib/X11/fonts/75dpi/, removing from list!
   could not open default font ‘fixed’
   R: cp PC机/usr/share/fonts/X11 目录下所有目录到 终端机 /xxx/lib/X11/fonts/下

step 4： libXi 移植

39、 libXext-1.0.3

libXext-1.0.3 被 libXCalibrate libXrandr-1.2.1 libfontenc-1.0.4依赖， 先编译

40、 libXi-1.1.2

tar jxf ../soft/libXi-1.1.2.tar.bz2
cd libXi-1.1.2
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD --enable-static=yes --enable-shared=yes --enable-malloc0returnsnull
make all; make install

41、 libXi-1.1.2

tar jxf ../soft/libXi-1.1.2.tar.bz2
cd libXi-1.1.2
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD --enable-static=yes --enable-shared=yes --enable-malloc0returnsnull
make all; make install

SofTool.CN Notes:
为什么40和41重复了，可能是作者写重复了吧 ^_^。 也不知道原作者是谁?下面的来源链接中也说是转载的。必须给原作者点5个赞！

以上是 X11 的移植

以下是 GTK 相关的移植

step 5： Cairo + Pango移植

42、 expat-2.0.0

tar zxf ../soft/expat-2.0.0.tar.gz
cd expat-2.0.0
./configure --host=$HOST --build=$BUILD --prefix=$PREFIX
make all; make install

43、 fontconfig-2.4.2

tar zxf ../soft/fontconfig-2.4.2.tar.gz
cd fontconfig-2.4.2
CFLAGS="-I${XROOT}/include -I${XROOT}/include/freetype2/freetype -I${XROOT}/include/freetype2/freetype/config"
LDFLAGS="-L${XROOT}/lib -lfreetype -lxml2"
ARCH=arm
./configure --build=$BUILD --host=$HOST --prefix=$PREFIX --with-freetype-config=$PREFIX/bin/freetype-config --with-arch=$ARCH --enable-libxml2 --disable-docs --enable-static=yes --enable-shared=yes --with-default-fonts=${XROOT}/fonts --with-cache-dir=${XROOT}/fonts/var/cache/fontconfig --with-confdir=${XROOT}/fonts
make all; make install
CFLAGS=
LDFLAGS=
ARCH=

44、 jpeg-6b ; 需要确认。 这个可能在交叉编译器中存在了，无须在编

tar zxf ../soft/jpegsrc.v6b.tar.gz
cd jpeg-6b
patch -Np1 -i $XROOT/soft/patches/pinky-3.1.1/meta/packages/jpeg/jpeg-6b/ldflags.patch
./ltconfig --disable-static --no-verify ltmain.sh arm-linux

./configure --prefix=$PREFIX --host=$HOST --build=$BUILD --enable-static=yes --enable-shared=yes
#修改Makefile CFLAGS= -O2 -I$(srcdir) 行为 CFLAGS= -O2 -I$(srcdir) -D_REENTRANT
make all; make install; make install-lib; make install-headers

45、 libpng-1.2.16

tar jxf ../soft/libpng-1.2.33.tar.bz2
cd libpng-1.2.33

#修改configure 把所有行 LIBS="-lz $LIBS" 改成 LIBS="${XROOT}/lib -lz $LIBS"
export CPPFLAGS="-g -I$PREFIX/include"

ac_cv_lib_z_zlibVersion=yes

./configure --host=$HOST --build=$BUILD --prefix=$PREFIX --enable-shared=yes --enable-static=yes
#修改Makefile相应项
#DEFAULT_INCLUDES = -I. -I$(srcdir) -I. -I$(PREFIX)/include
#LIBS = -L$(PREFIX)/lib -lz -lm
#LDFLAGS = -L$(PREFIX)/lib -lz -lm
make all; make install

46、 libICE-1.0.4

tar jxf ../soft/libICE-1.0.4.tar.bz2
cd libICE-1.0.4
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD --enable-shared=yes --enable-static=yes
make all; make install

47、 libSM-1.0.3

tar jxf ../soft/libSM-1.0.3.tar.bz2
cd libSM-1.0.3
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD --enable-shared=yes --enable-static=yes

make all
make install

48、 cairo-1.4.14

tar zxf ../soft/cairo-1.4.14.tar.gz
cd cairo-1.4.14
#vi configure 加以下３行
#    ac_cv_lib_z_compress=yes
#    ac_header_compiler=yes
#    ac_header_preproc=yes
#找 unset cairo_cv_backend_xcb_use 下面加
#    cairo_cv_backend_xcb_use=yes
#找 unset cairo_cv_backend_pdf_use 下面加
#    cairo_cv_backend_pdf_use=yes
#找 unset cairo_cv_backend_ps_use 下面加
#    cairo_cv_backend_ps_use=yes

ac_cv_header_zlib_h=yes
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD --enable-static=yes --enable-shared=yes --disable-some-floating-point

make all; make install

49、 libXft-2.1.12

tar jxf ../soft/libXft-2.1.12.tar.bz2
cd libXft-2.1.12/
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD --enable-shared=yes --enable-static=yes
make all; make install

50、 glib-2.14.6

tar jxf ../soft/glib-2.14.6.tar.bz2
cd glib-2.14.6
#vi arm-linux.cache 加入一下内容
    ac_cv_type_long_long=yes
    glib_cv_stack_grows=no
    glib_cv_uscore=no
    ac_cv_func_posix_getpwuid_r=no
#具体意义参考http://library.gnome.org/devel/glib/unstable/glib-cross-compiling.html
#vi glib/giounix.c, 添加 #include <bits/posix1_lim.h>

./configure --prefix=$PREFIX --host=$HOST --build=$BUILD --enable-shared=yes --enable-static=yes --cache-file=arm-linux.cache --enable-debug=no --disable-mem-pools
make all; make install

51、 pango-1.18.3

tar jxf ../soft/pango-1.18.3.tar.bz2

http://www.cups.org/software.php?VERSION=1.3.9&FILE=cups/1.4b1/cups-1.4b1-source.tar.bz2

cd pango-1.18.3
patch -Np1 -i $XROOT/soft/patches/pinky-3.1.1/meta/packages/pango/pango-1.18.3/no-tests.patch
patch -Np1 -i $XROOT/soft/patches/pinky-3.1.1/meta/packages/pango/pango-1.18.3/configure_fixes.patch

#修改 configure: line 22225
#    have_cairo=true
#    have_cairo_png=true
#    have_cairo_ps=yes
#    have_cairo_pdf=true
#    have_cairo_xlib=true
#    have_cairo_freetype=true
#    have_cairo_win32=false
#    have_cairo_atsui=false

# 把所有的LIBS="-lxxxx  $LIBS" 改成 LIBS="-L${XROOT}/lib -lxxxx  $LIBS" # xxxx 代表 freetype X11 cairo ICE

LD_LIBRARY_PATH=  #把路径设置为空
ac_cv_lib_cairo_cairo_surface_write_to_png=yes
ac_cv_lib_cairo_cairo_ps_surface_create=yes
ac_cv_lib_cairo_cairo_pdf_surface_create=yes
ac_cv_lib_cairo_cairo_xlib_surface_create=yes
ac_cv_lib_cairo_cairo_ft_scaled_font_lock_face=yes
CAIRO_CFLAGS="-I${XROOT}/include -I${XROOT}/include/cairo"
CAIRO_LIBS="-L${XROOT}/lib -lcairo"
GLIB_CFLAGS="-I${XROOT}/include -I${XROOT}/include/glib-2.0 -I${XROOT}/lib/glib-2.0/include"
GLIB_LIBS="-L${XROOT}/lib -lglib-2.0 -lgmodule-2.0 -lgobject-2.0 -lfontconfig -lxml2 -lfreetype"
FONTCONFIG_CFLAGS="-I${XROOT}/include/fontconfig"
FONTCONFIG_LIBS="-L${XROOT}/lib -lfontconfig"
FREETYPE_CFLAGS="-I${XROOT}/include/freetype2"
FREETYPE_LIBS="-L${XROOT}/lib -lfreetype"
X_CFLAGS="-I${XROOT}/include"
X_LIBS="-L${XROOT}/lib -lpng12 -lexpat -lXext -lxml2 -lX11 -lXft -lXrender"
X_EXTRA_LIBS="-L${XROOT}/lib -lpng12 -lexpat -lXext -lxml2 -lX11 -lXft -lXrender"
X_PRE_LIBS="-L${XROOT}/lib -lSM -lICE"
FREETYPE_CONFIG="${XROOT}/bin/freetype-config"
./configure --prefix=$PREFIX --host=$HOST --build=$BUILD --enable-shared=yes --enable-static=yes --enable-explicit-deps=no --disable-glibtest --disable-debug


make all; make install
PKG_CONFIG_PATH=$PREFIX/lib/pkgconfig #把路径在设置回来

TinyX移植步骤之二，请访问: https://www.softool.cn/blog-162.html

来源:
https://blog.csdn.net/linuxarmsummary/article/details/22326719